+31 (0)612 890610info@kshipbroker.com

< Terug naar het aanbod
-
-

Stuur de advertentie van de Offshore Heavy Tender Barge door naar een vriend
Naam vriend:
E-mail vriend:
Uw naam:
Uw e-mail:
Ik ontvang graag een kopie
Subject
Opmerkingen:
Doorsturen
-
Contact
ATLANTICA GAMMA
Algemene specificaties
Merk/model:
Offshore
Categorie:
Offshore
Afmetingen:
112,90 m x 35,80 m x 6,30 m
Tonnage:
Bouwjaar:
Prijs:
prijs op aanvraag
Korte omschrijving:
Kriesels Shipbroker BV can offer a Heavy Tender Barge HTB-1 for resale.

Scheeps specificaties

OVERVIEW

The tender drilling barge is designed for efficient and safe drilling and work-over operations using a Mast Equipment Package (MEP) set upon fixed installations in water depths between 10 and 120 meter in primarily benign environments, such as those West of Africa and in South East Asia but shall be designed for unrestricted service.

The Vessel will transport, erect onto a fixed platform installation a MEP structure for use during drilling and work-over operations.

The Vessel will have required facilities installed to provide the MEP with services such as electrical power, drilling mud, cement, compressed air, water, etc. in order to fulfill operations described in this specification.

Onboard the Vessel shall be arranged drilling support facilities such as bulk handling, storage and mixing, mud storage in tanks and pits, high pressure mud pump equipment, well cementing capacity, pipe and tubular storage and remote drilling control and monitoring system.

Furthermore the Vessel will provide office facilities, accommodation for up to 140 persons, helicopter landing facilities and life boat rescue arrangement.

The vessel will be moored with the fwd end towards the fixed installation.

The vessel is arranged with the main crane located aft of midship at port side.

This will facilitate that the Vessel to be moored alongside the fixed installation (beam or stem heading the prevailing wind direction) during erection of the MEP onto the fixed installation deck.

Before commencing the support o f the drilling/work-over operations, the Vessel will be repositioned with the fwd end towards the fixed installation.

 

Design
BassTech A/S. Gothenburg, Sweden.
Overall length
112.9 m.
Overall breadth
35.8 m.
Depth to main deck
11.1 m.
Design draught
6.3 m
Operating water depth
10m~120 m.
Main deck area
Pipe rack area 890 m2, Main deck general lay‐down area 150 m2,Texas deck lay‐down area 310 m2, Sack storage area 300 m2.
Total Payload
6,000 mt at Design Draft (full load draft).
Classification
ABS +A1, Barge, Drilling Tender, Circle P.
Flag
Panama.
Hull
Double Bottom & Side.
Full load disp
15,880 MT.
Quarters capacity
140 Person,10 in 1 Bed Cabin,130 in 2 Bed Cabins.
Helideck
Max loads
Mooring winches
Four (4) Oil States DMW‐250‐108 , 300 HP (224kW).
Anchors
8 x 6 ton Stevepris MK6.

POWER SYSTEM

Main engines
6 x Caterpillar 3516CHD 1603 Bkw
Main generator
6 x ABB AMG 0500LM06 LAP ,60Hz, 690v
Standby（Emergency）engine
1 x Caterpillar C32 994 Bkw
Standby（Emergency）generator
1 x ABB 60Hz, 480v

AIR SUPPLY SYSTEM

Air compressors
One VFD controlled service air compressor, Water cooled, screw type, oil injected, 400m³/h, 8.6Bar, One Air cooled, screw type, including dryer harbor air compressor 100m³/h, 8.6Bar, Two (One on/off and one VFD controlled) Water cooled, screw type, oil injected bulk air compressors, 3350m³/h, 11.5Bar Vendor by Ingersoll Rand.
Air receivers
Three start air receivers each for 3.0m³,8.6 Bar, Two bulk air receivers each for 3.0m³,11.5Bar, One service air receiver each for 3.0m³, 8.6Bar.

CRANES & PAR ETC

ain crane
Seatrax S126 Port Mid Aft.
Capacity
178 MT.
Aux crane
Seatrax S92 Starboard Mid Ship.
Capacity
36 MT.
Platform access
Forum personnel access ramp.
Tubular handling
Highline Transfer System 3.3 MT.

MOORING WINCHES & CONTOL SYSTEM

The 8‐Point Mooring System consists of the total system that is employed to position and hold the vessel on location while in operation. Generally, the system comprised of anchors, mooring lines, winches, sheaves, fairleads, pendant lines, buoys, shackles and other connecting equipment.

 

The mooring system is designed for water depth rating:

Maximum
200m (656feet). Note
Minimum
20m(65 feet)
Mooring winch
Four (4) Oil States DMW‐250‐108 , 300 HP (224kW)

ANCHORS & PENDANT BOUYS & LINES

Anchor
8×6 t (VRYHOF MK6).
Anchor wire
8 each, 2‐1/2" (64mm) diameter x 4,593, feet(1,400m) long, 6 x 49 SW IWRC with min brk strength 3629kn, compacted, strands drawn galvanized steel wire ropes insert zinc anode and both ends fitted with „sea‐fit closed socket ABS certification.
Anchor buoys
8 each, Steel Anchor Buoy, with crucifix at the top and padeye at the bottom c/w high visibility coating, reflective tapes, numbered and identification marking. The bottom padeye is designed to fit SWL 55 Ton 'crosby' shackle. 
Pennat wires
Eight anchor pennants connected to the anchors back pad‐eye for deployment and retrieval of the anchors shall be supplied. The pennants shall be usable for water depths up to 120 m.

MUD SYSTEM.

Mud pumps
3 x Aker Wirth TPK 1,600 AC‐RG‐WJ 7500psi.
Shale shakers
3 x MI Swaco MD 3.
Mud cleaner
MI Swaco D3 HYDROCYCLONES.
Degasser
MI Swaco CD‐1400 D‐GASSER.

CEMENT UNIT SYSTEM (ON BARGE)

Vendor
OCFE
Working pressure
The cementing unit and support systems were located in the forecastle. Two 3” ID x 10,000 psi cement lines were routed to the MEP hose transfer station.

HVAC SYSTEM

Chiller units
3 PCS YORK/CSH9573‐240Y fresh water cooled Chillers at 3x50% configuration. Each cooling capacity 700kW.
Chilled water circulation pumps
2 PCS chilled water circulation pumps, GRUNDFOS TP 125‐430/4.
Air handling units for accommodation area
2 PCS YORK/MAHK2630 AIR HANDLING UNITS serve for Accommodation area. Two units are at 2x50% configuration. Supply
Air handling unit for galley
1 PCS YORK/MAHK1409 AIR HANDLING UNIT serves for GALLEY, Supply
Air handling unit for AFT utility area
1 PCS YORK/MAHK2031 AIR HANDLING UNIT serves for AFT Utility area, Supply
Air handling unit for FWD utility area
1 PCS YORK/MAHK1409 AIR HANDLING UNIT serves for AFT Utility area Supply

POLLUTION CONTROL

Non hazardous contaminated drain system
Vendor
Hazardous contaminated drain system
Vendor
contaminated drain system to treat. Decanter
1 set 5 m³/h, Degasser
Bilge water system
Drains form other machinery spaces will be collected and treated by bilge water system.
Ballast water treatment sys.
Vendor

STORAGE CAPACITY

Liquid mud system
7,890 bbls on Barge.
Brine
4,190 bbls.
Base oil
2,560 bbls.
Drill water
8,950 bbls.
Potable water
4,500 bbls.
Diesel fuel
4,120 bbls.
Bulk volume
4 x 8,000 cu ft.
Sack storage
3,400 sacks.

SAFETY & LIFE SAVING

Life saving primary
3 x 50 man freefall aunch Life Boats.
Life saving secondary
8 x 35 man Inflatable Life Rafts.
Life saving secondary
1 x 6 man Fast Rescue boat.
Fire & gas detection
In accordance w/ABS class.
Fire suppression
In accordance w/ABS class.
Medical clinic
Furnished for 140 POB.

DRILLING EQUIPMENT

Mast rating
454MT (1,000 kip) Hook Load.
Mast capacity
340 stands of 5‐7/8” drill pipe (incl. HWDP) +, 10 stands of 8‐1/4” drill collars, (or), 170 stands of 5‐7/8” drill pipe + (incl. HWDP), +10 stands 8‐1/4” drill collars + 90 stands 9‐5/8” casing.
Mast make
Loadmaster, Self Erecting.
Mast height
152 ft+/‐2 ft Clear Height.
Substructure
Woolslayer Box‐on_box type.
Substructure capacity
460MT (1,015 kip) setback.
Skidding system
Lift & Roll Systems, X‐Y.
Drawworks
LDW 1,000k 2 x1500 hp, AC.
Rotary table
Cameron LH375.
Top drive
NOV TDS‐8SA 750 mt.
Top drive rating
62,250 ft lbs continuous.
Traveling block
Cameron TB500, 6X60” Sheave.
Drillers cabin
Enclosed, Climate Controlled.
Power slips
B & V PS500 Slips f/ DP & CSG.
Casing stabbing
OTG CSA.

TOP DRIVE

Vender
National Oil Varco.
Type
TDS‐8SA.

DRAWWORKS

Vender
Cameron, USA.
Type
LDW1000K.

ROUGHNECK

Vender
Forum, USA.
Type
WR‐120&WR‐80.

DRILLER’S CABIN

Vender
AXON, USA.

SHALE SHAKER & MUD CLEANER

Vender
MI‐Swaco, USA.
Type
MD‐3.

BOP EQUIPMENT

Diverter assy
Axon Pressure Product/Type 52 BOP, USA.
BOP handling
Ingersoll Rand/BHS 80 (4 x 20t).

 

 

For more information you sen dan e-mail to info@kshipbroker.com or call +31 (0)612-890610.

Informatie aanvraag

Vraag meer informatie over de Offshore Heavy Tender Barge
Naam*:
Land*:
Telefoonnummer*:
E-mail adres*:
Subject*:

Download specs / brochures

Schepen die u wellicht ook interesseren

Offshore JACK-UP RIG CJ50-X-120G, Beroepsschip for sale by Kriesels Shipbroker BV

JACK-UP RIG CJ50-X-120G

Merk/model:Offshore
Categorie: Offshore
Afmetingen:69.98 / 67.67 / m
Tonnage :
Bouwjaar:
Prijs: Prijs op aanvraag
Omschrijving:4x Jack-Up RIG, type CJ50-X-120G for SALE.
Offshore Crew Supplier, Beroepsschip for sale by Kriesels Shipbroker BV

NB FAST CREW SUPPLIER 4008

Merk/model:Offshore
Categorie: Offshore
Afmetingen:41.20 / 8.70 / 3.00 m
Tonnage :
Bouwjaar:2021
Prijs: Prijs op aanvraag
Omschrijving:Using this design innovation, Shipyard developed the Patrol Boats and Fast Crew Suppliers for sale.
Offshore Jack Up Rigs, Beroepsschip for sale by Kriesels Shipbroker BV

JACK UP RIGS

Merk/model:Offshore
Categorie: Offshore
Afmetingen: / / m
Tonnage :
Bouwjaar:
Prijs: Prijs op aanvraag
Omschrijving:Several JACK UP RIGS for Sale !!