Supply inland shipping - Kriesels Shipbroker - Onafhankelijk Scheepsmakelaar

Send advertisement of the . Offshore, WORKOVER LIFTBOAT to friend
Name friend:
Email friend:
Your name:
Your email:
I would like to receive a copy
Subject
Comments:	I would like you to view the following ship: . Offshore, WORKOVER LIFTBOAT

Send to friend

More information

“FENG LONG 01” LIFTBOAT

General specifications

Brand/model:

Category:

Offshore

Dimensions:

64.50 m x 45.65 m x 5.00 m

Tonnage:

Build year:

2014

Price:

price on request

Short description:

Self-propelled Self-elevating Workover Unit. From Completion to P&A, replace Jack-Up Drilling Rig.

Schips specifications

Self-propelled Self-elevating Workover Unit.

From Completion to P&A, replace Jack-Up Drilling Rig.

This “FENG LONG 01” WORKOVER LIFTBOAT is a self‐propelling jack‐up for Work‐over operation and Well testing tech.

It is equipped with three cylindrical pile legs and cantilever beam device. It is used in BoHai bay, the Middle East, Southeast Asia and other waters. It is applied to the depth of 5.6~50 meters similar waters within the scope of the ocean or sea oil, gas and water Wells. It is used for heavy or light overhauling of 5500 meters (3.5 inch pipe) depth within the straight/slope Wells.

The “FENG LONG 01” WORKOVER LIFTBOAT maximum operating depth is 50 meters

(including tidal range), the maximum load is 1100 tons of variable operating conditions (including hook load). Cantilever beam longitudinal operating range

the center of the

turntable is the most distant from the stern is 12.2m, lateral movement of the left and right of the drill block is 3.5m and the minimum design temperature is ‐10°C。It is equipped with two1 100kW Azimuth propeller rudder system and one 350kW tunnel thruster system in order to improve the ship maneuverability, easy operation and short distance transition in position.

The “FENG LONG 01” WORKOVER LIFTBOAT with two Azimuth propeller rudder system is in draft 3.2 meter and propulsion motor power of 2 x 1100Kw have the

ability to reach about 5 knots under hull cleaning, calm, and deep under hydrostatic condition.

Principal dimensions

Overall length

64.50 m

Moulded Length

45.65 m

Moulded Breadth

40.70 m

Moulded Depth

5.00 m

The design of full load waterline

3.40 m

The design of light load waterline

3.20 m

Deck room height

3.00 m

Leg Number X Diameter X Length

3×∅3.0m×76 m

The depth of pile shoe

1.6 m

The length of pile shoe

9.6 m

The length of the drill floor

9.875 m

The breadth of the drill floor

15.07 m

The distance from the main deck high to the drill floor

7.35 m

The height of the derrick

36.0 m

Maximum distance from the center of the turntable to the stern

12.2 m

The height of the cantilever beam

3.7 m

The length of the cantilever beam

27.47 m

Helicopter platform diameter

14.0 m

The height from Helicopter platform to the baseline

14.0 m

Price, location, owners etc. shall be made available against named clients.

If you are interested please contact me.

Information request

Request more information about the . Offshore, WORKOVER LIFTBOAT
Name*:
Land*:
Telephone*:
Email address*:
Subject*:
I would like to receive more information about the . Offshore, WORKOVER LIFTBOAT